Addressable RGB 150-LED Strip, 5V, 5m (SK6812) Shipping:1 day This servo is capable of

This servo is capable of full 360 degree continuous rotation and can be connected to an output pin of an Arduino board directly without the need for a motor driver

The shield's EN pin can be driven high to turn off motor outputs for both motor channels

The ratiometric output voltage is centered at VCC/2 and has a typical error of ±2%

* [XBee and X-CTU Hookup Guide](https://learn

which lets you use voltages above your stepper motor's rated voltage to achieve higher step rates

Addressable RGB 150-LED Strip, 5V, 5m (SK6812) Shipping:1 day This servo is capable ofThis 5 meter long strip contains 150 RGB LEDs that can be individually addressed using a one wire interface, allowing you full control over the color of each RGB LED. The flexible, waterproof strip runs on 5 V and can be chained with additional SK6812 or WS2812B strips to form longer runs or cut apart between each LED for shorter sections. Close up of one segment of a SK6812 based LED strip with the red, green, and blue LEDs on at their dimmest